My car will start but will not move out of reverse

Question:
1997 corvette c5 8 cylinder; I just replaced the battery in my car. My car will start but will not move out of reverse which is the gear it was in when it stalled. It was found that the battery was dead so I replaced it. Is there a code reset that needs to be done?

Answer;
Your vehicle should not be able to start in reverse gear. If it does, then your position switch (neutral safety switch) is malfunctioning and should be replaced.

If you mean the shifter moves just fine but the vehicle it self is stuck in reverse no matter where you put the shifter, then either the shifter cable has become disconnected or your trans is broken internally. Put the vehicle on a rack and have someone move the shifter and see if the manual gear selector on the side of the transmission is moving. not.. replace shifter cable. If it does move, rebuild transmission, if you try to put it in gear it won't go to any gear. It will just start to roll if you release the emergency brake , then either the shifter cable has become disconnected or your trans is broken internally. Put the vehicle on a rack and have someone move the shifter and see if the manual gear selector on the side of the transmission is moving. not.. replace shifter cable. If it does move, rebuild transmission.