Question:
I NEED TO KNOW HOW TO REMOVE AND REPLACE THE BLOWER MOTOR FOR THE A/C AND HEATER FAN. IT IS LOCATED ON THE RIGHT SIDE UNDER THE GLOVE BOX
Answer:
- Remove the glove box.
Remove the blower duct. On air conditioned models, loosen the evaporator sealing band and slide it towards the evaporator.
Disconnect the wire connections from the blower.
Remove three mounting bolts from blower.
Remove the blower
I did this and the blower motors that are offered here in Portland at Most Auto parts store is some made in china crap that is 1/8 of an inch bigger in diameter and will not fit into the airbox. Just an FYI< Make sure the one you get from the auto parts store fits/mounts into the box before leaving the store.
ReplyDelete